300kg cardan shaft balancer
Interview
Gqb-7 dynamic balancing machine is mainly used for the balance correction of small and medium-sized motor rotors, rollers, rubber sticks, fans, impellers, shafts and other rotating workpieces. The machine is driven by universal coupling, which has the advantages of fast start, high measurement accuracy, convenient operation and high efficiency. The measurement system can be digital display, Chinese liquid crystal or microcomputer industrial control system.
Main technical indicators:
1. Mass range of workpiece (kg) 16 ~ 300
2. Maximum diameter of workpiece (mm) 1080
3. Minimum distance between two supports (mm) 100
4. Workpiece shaft diameter range (mm) 11 ~ 180
5. Maximum distance from end face of coupling to center of right support seat (mm) 1500
6. Minimum achievable residual unbalance EMAR ≤ 1g · mm  ̄ 2kg
7. Reduction rate of Unbalance: URR ≥ 85 μ 3_
8. Balance speed (R  ̄ 2  ̄ min) 300 ~ 2500
Note: if there is any change in the technical parameters and appearance, we will not inform you otherwise. At the same time, according to the customer's requirements
enquiry form:
enquiry content:
You have no items to require