Gqb-10 type balancing machine is mainly used for balancing and proofreading of large and medium-sized motors, ceramic machinery, rollers, rubber sticks, fans, woodworking machinery, shafts and other rotating workpieces. This machine is driven by universal coupling. It has the advantages of fast starting, high measuring accuracy, convenient operation and high efficiency. Industrial computer (single chip microcomputer) is used in the measurement system. The speed, value and phase of the rotor are all displayed digitally. The six types of rotor can be selected, displayed intuitively, and can be memorized and displayed. The unbalance is directly displayed in "g". The electromechanical transducer adopts magnetoelectric sensor, which has the advantages of large output, reliable performance and good stability.

Main technical indicators:

1. Mass range of workpiece (kg) 100 ~ 3000

2. Maximum diameter of workpiece (mm) 2000

3. Minimum distance between two supports (mm) 400

4. Workpiece shaft diameter range (mm) 40 ~ 300

5. Maximum distance from end face of coupling to center of right support seat (mm) 2500

6. Minimum achievable residual unbalance EMAR ≤ 1g · mm ￣ 2kg

7. Reduction rate of Unbalance: URR ≥ 85 μ 3_

8. Balance speed (R ￣ 2 ￣ min) 250 ~ 1000 (frequency control)